Waterfront living is a big part of life in Brevard County, from Merritt Island canals to homes along the Indian and Banana Rivers. Docks often have outlets, lighting, boat lift motors and shore power, all in a place where water, salt air and electricity meet. That combination calls for equipment that is built for it, installed correctly and checked regularly.
Why dock electrical needs extra care
Electricity near water can be dangerous in ways that are easy to miss. A damaged cord, a corroded connection or a fault in a lift motor can put current where it should not be, on metal parts of the dock or in the water around it. Salt air and humidity speed up corrosion, so equipment that was fine a few years ago may not be today.

What a safe dock setup includes
- Ground-fault protection. Current electrical code requires ground-fault protection for dock outlets and equipment, which shuts power off quickly when current leaks where it should not.
- Equipment rated for wet and marine locations, including in-use (bubble) covers on outlets and corrosion-resistant boxes and fittings.
- A clearly marked shutoff at the shore end so power to the dock can be turned off quickly.
- Properly sized wiring and protection for boat lift motors and shore power, installed with a permit.
- Good grounding and bonding of the dock’s electrical system and metal parts.
Warning signs to act on right away
- A tingle or shock when touching a lift, ladder, rail or the water near the dock
- GFCI or breakers for the dock that trip often
- Rust, green corrosion or cracked covers on outlets, boxes or the lift motor
- Lights that flicker or a lift motor that hums but struggles
- Extension cords run down the dock as a permanent fix
If anyone feels a tingle in or near the water, get everyone out of the water without touching metal, turn off power to the dock at the shore and do not let anyone swim there until an electrician has checked it.
Simple habits that help
- Turn off power to the dock before anyone swims near it.
- Test the dock’s GFCI protection monthly with the TEST button.
- Keep covers closed and cords off walking surfaces.
- Have the dock’s electrical system inspected after storms, high water or any work on the dock, and at least once a year.
When to call Advent Electric
Call to add or upgrade dock power, lighting or a boat lift circuit, for an annual inspection, after a storm or high water, or right away if anyone feels a tingle near the dock. Advent Electric serves waterfront homes across Brevard County, including Merritt Island and the communities along the Indian River.
Related services and guides
Get your dock checked.
Advent Electric can inspect dock power and boat lift circuits and fix what needs attention.
Request a quoteFrequently asked questions
Do dock outlets need GFCI protection?
Yes. Current electrical code requires ground-fault protection for outlets and equipment on docks, and it is one of the most important safety features near water. Test it monthly with the TEST button.
Why does my boat lift keep tripping the breaker?
Common causes include a failing motor, corroded connections, water in a box or wiring that is undersized for the motor. Repeated trips are a sign to stop using it and have it checked.
What should I do if I feel a tingle in the water near my dock?
Get everyone out of the water without touching metal parts, turn off power to the dock at the shore and keep people out of the water until an electrician has inspected the dock.
How often should dock wiring be inspected?
At least once a year, and after storms, high water or any construction on the dock. Salt air and moisture cause corrosion that is not always visible.



